Abrasive Blasting and Thermal Spray Coating
Abrasive blasting, metallizing, stress relieving and industrial painting, at our five Bengaluru units or at your site.
- ISO Certified
- NSIC Registered
- Site Teams Across India
- Years in Operation
- 27
- Facilities
- 5
- Employees
- 250+
- Clients Served
- 84
- Shop Floor
- 24/7
Clients Across Indian Industry
Complete Surface Treatment Services
Surface Preparation4 services
Thermal Spray Coating4 services
Heat Treatment and Finishing5 services
Read the Transcript
Hi, I am R.D.G. Shekar, Managing Director of Mythri Metallizing Private Limited. We are corrosion protection engineers in India. We started this business in 1999. We do surface preparation, metallizing and painting for major customers in cement, steel, shipbuilding, petroleum and refineries, and we have done many projects all over India. One that touched all our hearts is the Murudeshwara Temple and Gopura. It was a real experience in our life at Mythri. Mythri Metallizing is focused on quality and timely service. Mythri is the solution for your corrosion problem. We are the corrosion protection engineers in India.
A Message from Our Managing Director
“Mythri is focused on quality and timely service.”
R.D.G. ShekarManaging Director
- Corrosion protection since 1999
- Cement, steel, shipbuilding, petroleum and refineries
- Projects across India
A Controlled Four-Step Process
Inspection
Substrate inspected and coating system agreed.
Blasting
Cleaned to the specified grade and profile.
ISO 8501-1 · Sa 2½ / Sa 3
Spraying
Zinc or aluminium applied within hours of blasting.
Testing and release
Thickness and adhesion measured and recorded.
National and International Standards
View Our Catalogue
- Surface CleanlinessSa 2½ / Sa 3ISO 8501-1 · SSPC · NACE
- Zinc SprayIS 5905IS 6586 · BS 5493
- Aluminium SprayIS 2590IS 739 · BS 2569
- Coating Thickness175–200 µmChecked to IS 3203
- AdhesionASTM D4541Scribe test to IS 5905
- QualityISO 9001:2015Certified by TÜV SÜD
-
ISO 9001:2015
Certified by TÜV SÜD
-
MSME
Udyam and NSIC registered
-
MSME ZED
Pledge Certificate
-
Registered trademark
Trade Marks Registry, Class 37
Safe Working Practices
Full protective equipment
Enclosed booths
Supervised operators
Records for each project
Five Facilities in Bengaluru
Unit IHead Office
Blasting, metallizing and primer application
View Unit
Unit II
Blasting and painting of large fabrications
View UnitUnit III
Sanding, putty, primer and finishing coats
View UnitUnit IVCPEI
Stress relieving, blasting and primer coating
View Unit
Unit V
Large fabrications, blasting, painting and stress relieving
View UnitStress Relieving Furnaces
- Location
- Peenya and Dabaspet
- Capacity
- Up to 30 t, 7 × 3.5 × 3 m
- Temperature
- Up to 900 °C, typically about 650 °C
- Records
- Printed time–temperature record
In Our Clients’ Words
View All Case Studies-
“Entirely to our satisfaction in terms of speed, quality and workmanship.”
Chettinad Cement CorporationAriyalur, Tamil Nadu · 2012 · completion letter
Blasting and aluminizing of the RABH chimney
Read the Case Study -
“The quality of their workmanship was excellent.”
Essar ProjectsHazira, Gujarat · 2013 · completion letter
Zinc metallizing, coarse screen of a power plant
Read the Case Study - Prakash Asphaltings & Toll Highways
“Resourceful, competent and very co-operative at our project site.”
Prakash Asphaltings & Toll HighwaysRatlam, Madhya Pradesh · 2011 · completion letter
Metallizing (aluminizing) and 3 coats of paint on 2,600 m² of steel girders
Read the Case Study
Planning similar work on a chimney, tank, girder or plant structure?
Industries We Serve
Request a Quotation
Send your drawing and one of our engineers will respond directly.
- Reply within one working day
- Drawings kept confidential
- Email acknowledgement
Thank you. Your enquiry has been received.
One of our engineers will contact you to discuss the requirement. A confirmation has been sent to your email address.